Lighting and rendering workflow

For a bit of background as to why we went this way, please see lighting pipeline choices

Shot files

Within each act, there are 3 files per shot:

1- ansnn.blend (where n is the act number, and nn is the shot number. This is the anim file, starts in layout, then goes to animation.

2- ansnnlight.blend : this is the lighting/rendering/compositing file.

3- optional: ansnncomp.blend : a second comp file.

Building the files

Anim files

Anim files are built during layout, preferably using reference_desk, linking in library items as groups. The files need to conform to the layout specification in the image.

Local 'per shot' models are allowed, but if they span more than one shot they need to be linked.

Lighting files

These are built as follows :

1- create a new file with the name ansnnlight.blend and save it in the act directory.

2- set the start and end frame to the same as the anim file

3- set the resolution and frame rate to 2048x858 -24fps.

4- delete any default cube/camera/light/etc in the file

5- File->Link: browse to the anim file, select 'objects', select all the objects and link them in. Make sure you uncheck 'Active Layer'

6- Set the active camera to the same one from the anim file. Note this may have happened automatically in 5.

Comp files

1- create a new file with the name ansnncomp.blend and save it in the act directory.

2- set the start and end frame same as the anim/comp files.

3- set the resolution and frame rate to 2048x858 -24fps.

4- switch to compositing. Brows to the (TBD) render folder for the shot, and link in the image sequences that you are going to comp.

Lighting file rules

1- you may change the layers of objects to organize them/ create rendelayers.

2- you may add lights (natch)

3- you may change world/scene/rendersettings.

4- you have freedom with compositing.

5- you may make any non animated objects local (be careful!)

6- you may not make animated objects local. This will often just break the animation.

7- you may make the camera local (read camera notes if you do), even if it's animated.

8- you can change the geometry of non animated objects, so long as you do not interfere with the animation itself.

9- you can create local geometry for the shot.

10- slight camera modifications are ok- larger ones need to be discussed with the director. Please document any camera modifications on Helga, to avoid unpleasant surprises.

11- lights may be animated.

12- you may animate objects as needed. If the anim involves more than a few keyframes, consider creating a new anim task for the file, to be done in the anim file and linked to the lighting file.

Naming

Due to the collaborative nature of animation, odds are very good that more than one person will be involved in lighting any given scene. This makes our naming conventions very important.

Scene Layers

Thanks to the nifty “3D View: Scene Layer Names” addon, we can keep track of what goes where. This addon can be enabled in the User Preferences window; if it is not visible there, you can find it under lib > python > addons > scene_layernames.py in your svn folder. Name your scene layers in a logical way. For example, 0. gil 10. gil rim 1. 11. gil fill 2. hair 12. hair rim 3. 13. hair fill 4. camera 14.

5. bg 15. bg rim 6. 16. bg fill 7. 17. 8. special 18. special 9. 19. junk drawer

Lamps

The way you name lamps should taper from very general to very specific. Separate the parts of the names with an underscore to make it more legible. (Remember to name the lamp data as well as the lamp object!) A good formula we could use would be something like light_[subject]_[purpose]_[direction]_[number/main]. Subjects are whatever is being illuminated, for instance gil, gil_hair, paper, station, bg(background) etc. Purpose would be something like rim, fill, shadow, halo, etc. Direction could be R(right), L(left), up, dn(down), back, front, etc. For example, your outliner might end up looking like this:

light_gil_fill

light_gil_rim_L

light_gil_rim_R

light_bg_fill

light_bg_shadow

light_hair_rim_back_1

light_hair_rim_back_2

light_hair_rim_back_3

light_hair_rim_back_main

light_hair_fill

Render Layers

Set up your render layers with appropriate names (typically, [subject]_[purpose]) and only include the scene layers necessary.

General Lighting Workflow

1- create the lighting file.

2- adjust world settings/renderlayers

3- add lights

4- begin compositing for final render

5- iterate the previous steps 2-4.